Stop Jerkey Graphics in windows xp

I have for a long time had problems with "jerky" graphics in some 3d games and 3dmark, and have had relativly high cpu loads in idle condition. The cpu load would pulse from 1-2% up to 10-12%-load with about three-five seconds intervals...(in idle)
The jerking has not been due to low perfomance hardware or old drivers and I have had the problems on two seperate systems.
If you are connected to a LAN and have similar problems, this might be the solution:
Tweak1
1.RightClick "MyComputer"
2.Select "Manage"
3.Click on "Device Manager"
4.DoubleClick on your NIC under "Network Adapters"
5.In the new window, select the "Advanced" tab
6.Select "Connection Type" and manuelly set the value of your NIC. (Not "Auto Sense"
which is default.) 
7.You should reboot...

On my systems the "jerking" in 3D games was completly gone, and so was the high idle cpu load.

Tweak 2
 1.Right click "My Computer"
2.Select "Manage"
3.Click on "Device Manager"
4.Double click on your Zip under "Disk Drives" ( it may be listed as "IMG VP01" or
something similar - pick the one that's not a hard drive)
5.Disable the device

Share this post



0 comments:

Post a Comment